Skychart

User Tools

Site Tools

Trace: • contact • pictures • menuchart • menuchart • contact • menutelescope
en:documentation:menutelescope

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
en:documentation:menutelescope [2012/09/05 15:16] – [Control Panel] pchen:documentation:menutelescope [2021/06/01 18:21] (current) – [Track telescope] some typos fixed ralv
Line 9: Line 9:
  
 Same as **Setup -> System -> [[system#telescope|Telescope]]**. Same as **Setup -> System -> [[system#telescope|Telescope]]**.
 +
 +
 +===== Coordinates system =====
 +
 +It is very important that both the program and the telescope driver use the same coordinate system. 
 +
 +Most INDI and ASCOM drivers specify if they want J2000 or Local coordinates and Skychart obey to that.\\
 +Even for Local coordinates this is always non refracted coordinates.
  
  
Line 16: Line 24:
 Here, you can make specific settings for the driver that you chose earlier in the dialog. There are a only a few drivers but they are usable with a multitude of mounts with each their specific possibilities. Please, check the manual that came with the driver and mount.  Here, you can make specific settings for the driver that you chose earlier in the dialog. There are a only a few drivers but they are usable with a multitude of mounts with each their specific possibilities. Please, check the manual that came with the driver and mount. 
 \\ \\ \\ \\
-See specific help about each panel for [[telescope_ascom|ASCOM]], [[telescope_indi|INDI]], [[telescope_lx200|LX200]] and [[telescope_encoder|Encoder]].+See specific help about each panel for [[telescope_ascom|ASCOM]] or [[telescope_indi|INDI]].
 \\ \\ \\ \\
 A very important feature that all driver specific dialogs share, is the **Connect** button. When the telescope is physically connected and the driver/mount specific settings are OK, the program usually connects automatically. The connection status is displayed at the bottom of the dialog. Somewhere between the ''Connect'' and the ''Disconnect'' button, there is a coloured square. Red indicates a disconnected status, green indicates the connected status.  A very important feature that all driver specific dialogs share, is the **Connect** button. When the telescope is physically connected and the driver/mount specific settings are OK, the program usually connects automatically. The connection status is displayed at the bottom of the dialog. Somewhere between the ''Connect'' and the ''Disconnect'' button, there is a coloured square. Red indicates a disconnected status, green indicates the connected status. 
Line 23: Line 31:
 \\ \\ \\ \\
 The {{en:documentation:i48.png|}} icon of the **[[main_bar#telescope_group|telescope group]]** on the main bar is a shortcut for this function.  The {{en:documentation:i48.png|}} icon of the **[[main_bar#telescope_group|telescope group]]** on the main bar is a shortcut for this function. 
 +
 +===== INDI Control Panel =====
 +
 +This option is only show when the telescope interface is INDI
 +
 +Open a standard INDI option setting panel for all your INDI devices
  
 ===== Slew ===== ===== Slew =====
Line 32: Line 46:
 Another way to slew your telescope to the next object, is by a right mouse button click on the label of the selected object. In the pop up window, click the line **Telescope**, and in the next pop up **Slew**.  Another way to slew your telescope to the next object, is by a right mouse button click on the label of the selected object. In the pop up window, click the line **Telescope**, and in the next pop up **Slew**. 
 \\ \\ \\ \\
 +You can stop the current slew operation with the **Abort Slew** menu or the keys: **Ctrl+K**.
 ===== Sync ===== ===== Sync =====
 From the menu: **Telescope -> Sync** From the menu: **Telescope -> Sync**
Line 48: Line 62:
  
 It is important to remember that a telescope connection is linked to the chart that was active when you connect it. \\ It is important to remember that a telescope connection is linked to the chart that was active when you connect it. \\
-This allow to use more than one telescope, even with a different driver, each one connected to it's chart.+This allows to use more than one telescope, even with a different driver, each one connected to it's chart.
  
-So if you want many chart to follow a single telescope do it in the chart with the narrower field of view, and [[menuwindow#link_all_chart|link]] the other chart to this one.+So if you want many charts to follow a single telescope do it in the chart with the narrower field of view, and [[menuwindow#link_all_chart|link]] the other charts to this one.
  
  
  
en/documentation/menutelescope.1346850978.txt.gz · Last modified: 2015/11/06 20:33 (external edit)