Differences

This shows you the differences between two versions of the page.

--- en:documentation:menutelescope [2016/01/11 16:27] – [Telescope settings] admin
+++ en:documentation:menutelescope [2021/06/01 18:21] (current) – [Track telescope] some typos fixed ralv
@@ Line 24: / Line 24: @@
 Here, you can make specific settings for the driver that you chose earlier in the dialog. There are a only a few drivers but they are usable with a multitude of mounts with each their specific possibilities. Please, check the manual that came with the driver and mount.
 \\ \\
-See specific help about each panel for [[telescope_ascom|ASCOM]], [[telescope_indi|INDI]], [[telescope_lx200|LX200]] and [[telescope_encoder|Encoder]].
+See specific help about each panel for [[telescope_ascom|ASCOM]] or [[telescope_indi|INDI]].
 \\ \\
 A very important feature that all driver specific dialogs share, is the **Connect** button. When the telescope is physically connected and the driver/mount specific settings are OK, the program usually connects automatically. The connection status is displayed at the bottom of the dialog. Somewhere between the ''Connect'' and the ''Disconnect'' button, there is a coloured square. Red indicates a disconnected status, green indicates the connected status.
@@ Line 62: / Line 62: @@
 It is important to remember that a telescope connection is linked to the chart that was active when you connect it. \\
-This allow to use more than one telescope, even with a different driver, each one connected to it's chart.
+This allows to use more than one telescope, even with a different driver, each one connected to it's chart.
-So if you want many chart to follow a single telescope do it in the chart with the narrower field of view, and [[menuwindow#link_all_chart|link]] the other chart to this one.
+So if you want many charts to follow a single telescope do it in the chart with the narrower field of view, and [[menuwindow#link_all_chart|link]] the other charts to this one.