Differences

This shows you the differences between two versions of the page.

--- en:documentation:quick_start_telescope [2013/06/13 09:33] – modification externe 127.0.0.1
+++ en:documentation:quick_start_telescope [2018/06/16 17:12] (current) – [Guide content] pch
@@ Line 1: / Line 1: @@
+====== Driving a telescope ======
 ===== Guide content =====
@@ Line 8: / Line 10: @@
   * **[[quick_start_server|Cartes du Ciel-SkyChart as an application server]]**
-====== Driving a telescope ======
-Please see the documentation page at [[menutelescope]]
 The basic steps are:
-  - Select the telescope driver (ASCOM or other driver; if ASCOM, be sure to have installed the ASCOM drivers)
+  - Select the telescope driver (ASCOM or INDI, be sure to have installed the corresponding drivers)
-  - Once you have selected the telescope driver, go to telescope control panel and connect the telescope
+  - Once you have selected the telescope driver, go to telescope control panel and set the basic telescope configuration: COM port, model variant, ...
-  - Click the "slew" button to command the telescope to go to your target
+  - When ready (all cables set, hand-pad initialization done), connect the telescope using the **Connect** button.
+  - Click the **Slew** button to command the telescope to go to your target.
+The complete documentation is available with the [[menutelescope|Telescope Menu]]
+See specific the help about each driver for [[telescope_ascom|ASCOM]] or [[telescope_indi|INDI]].