Skychart

User Tools

Site Tools

Trace:
en:documentation:system

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
en:documentation:system [2018/06/16 17:09] – pchen:documentation:system [2018/06/16 17:10] (current) – [Indi driver] pch
Line 58: Line 58:
 After setting the server host and port, click "Connect and get device list" to fill the list of driver supported by your INDI server. Then select the telescope driver from the list. After setting the server host and port, click "Connect and get device list" to fill the list of driver supported by your INDI server. Then select the telescope driver from the list.
  
-It may be difficult to know the device serial port name if you have many adapter or if you use a USB-serial adapter. In this case use the dmesg command to find this name. \\ +
-In the following example you must indicate /dev/ttyS0 for the motherboard port or /dev/ttyUSB0 for the USB port.  +
-<code> +
-serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A +
-usb 5-1: FTDI USB Serial Device converter now attached to ttyUSB0 +
-</code>+
  
 ==== Manual Mount ==== ==== Manual Mount ====
en/documentation/system.1529161743.txt.gz · Last modified: 2018/06/16 17:09 by pch